Nuevas Actualizaciones de Productos de AMX |

ago 08

Nuevas Actualizaciones de Productos de AMX

Propietarios, Software Add comments

Nuevas descargas para actualizar varios productos de AMX, (Modero Touch Panels, WAP250G, KeypadBuilder y Novara DCS); simplemente pincha en el enlace y te llevará a la descarga. No hay que olvidar que para realizar dicha descarga hay que estar registrado en AMX.com como Dealer/World Partner.

AMX

Eso sí, la ponemos tal cual nos llega. (En inglés)

Update 1:

Modero MVP-7500 Touch Panel Firmware v2.84.7 (11.2 MB)

Release Date: August 4, 2008

New Features:

Fix for WPA reauthentication issues
Delete EAP key file on panel boot to force new key retrieval
New/updated Marvel wireless driver is included in this release
New/updated DeviceScape wireless security supplicant is included in this release
FTP of dynamic image fix
DHCP timeout fix. Timeout for DHCP changed from one minute to one hour.
DNS fix. Panel will now correctly retrieve DNS information.
Panel will now correctly register itself with DNS server.
Fix for panel lockup when panel goes to sleep (blank screen).
Fix for panel lockup (buttons not working) when panel is not asleep.
Major stability issues are resolved in this release.
In previous builds, when Site Survey page was accessed and exited, the panel would enter “roaming enabled” mode until panel was rebooted.
Some timeouts have been modifed in the wireless supplicant to loosen the restrictions placed on a battery powered device. This should help panels with online/offline issues.
Many changes incorporated to resolve several online/offline issues that have been reported from the field.
Changes made to better handle deauthentication/reauthentication events initiated by the WAP.
Fix to allow firmware download to cradle. This has been broken in previous builds.
Firmware now correctly puts flash into correct state prior to reboot to ensure data is not lost.
Enhanced 802.11 EAP enabled connectivity.
Fix for G4 restart issue.

Update 2:

Modero MVP-8400 and MVP-8400i Touch Panel Firmware v2.84.18 (11.7 MB)

Release Date: August 4, 2008

New Features:

Fix for WPA reauthentication issues.
Delete EAP key file on panel boot to force new key retrieval.
New/updated Marvel wireless driver is included in this release.
New/updated DeviceScape wireless security supplicant is included in this release.
Fix for door bell tone when working with Metreau Entry Communicator.
FTP of dynamic image fix.
DHCP timeout fix. Timeout for DHCP changed from one minute to one hour.
DNS fix. Panel will now correctly retrieve DNS information.
Panel will now correctly register itself with DNS server.
Fix for panel lockup when panel goes to sleep (blank screen).
Fix for panel lockup (buttons not working) when panel is not asleep.
Major stability issues are resolved in this release.
In previous builds, when Site Survey page was accessed and exited the panel would enter “roaming enabled” mode until panel was rebooted. This has been fixed.
Some timeouts have been modifed in the wireless supplicant to loosen the restrictions placed on a battery powered device. This should help panels with online/offline issues.
Many changes incorporated to resolve several online/offline issues that have been reported from the field.
Changes made to better handle deauthentication/reauthentication events initiated by the WAP.
Fix to allow firmware download to cradle. This has been broken in previous builds.
Firmware now correctly puts flash into correct state prior to reboot to ensure data is not lost.
Enhanced 802.11 EAP enabled connectivity.
Fix for G4 restart issue.

Update 3:

NXA-WAP250G Firmware v1.0.6.0 (1.28 MB)

Release Date: August 4, 2008

New Features:

Adds WPA/WPA2 Security.
Fixes root failing to ping repeater if Root AP is power cycled
Fixes repeater not recovering connection if Root AP is powered down for over 20 minutes
Adds MAC filtering
Adds NULL check in CGI to prevent system crash if HTTP attack
Adds web UI for 11b only radio mode
Fixes wizard page wpa-psk setting
Adds VAP priority support
Fixes scan function in repeater mode
Fixes bug in static ip subnet mask
Adds settings of WEP key index and key length of wizard page
Fixes bug where Wizard did not set all WEP keys on VAP#2
Fixes WEP status feedback button
Fixes Repeater mode
Fixes not allowing country code cannot reset in GUI
Adds ability to select and store multiple WEP keys
Adds displaying of all MAC addresses on Details page
Fixes functionality of cancel button on setup wizard
Adds more detailed instructions to reboot page
Clarifies wording in setup wizard
Adds firmware upgrade progress bar
Adds exception list for MAC addresses
Fixes VAP Management priority for VAP1
Fixes functionality of subnet mask

Update 4:

KeypadBuilder v2.3.0.92 (34.3 MB)

Release Date: August 5, 2008

New Features:

Project Configuration (R-1, R-2, R-3 only): Added checkbox to flag remote project as Teletext remote.
Display Configuration (R-1, R-2, R-3 only): Modified button labels to reflect that there is one additional macro button and one less remote device button on Teletext remotes.
Engraving (R-1, R-2, R-3 only): Modified button labels to reflect that there is one additional macro button and one less remote device button on Teletext remotes.
Edit List Box Table (DMS Keypads): Auto-assignment of channel codes – Added properties to be used to automatically assign channel port/code values to new table entries.
Document Versioning: All projects created or saved using this release of KeypadBuilder (v2.3) are saved using Document Version 1.1 and cannot be opened by older versions of KeypadBuilder.

Update 5:

Novara DCS 1000 v1.05 (4.34 MB)

Release Date: August 5, 2008

The Novara DCS software application allows the ControlPad to perform various functions, such as RS-232/IR and relay control, button feedback, delay time, and time out.

New Features: